Owens Corning Blown In Insulation in Long Beach: What to Know First
Owens Corning blown in insulation installation and removal in Long Beach typically runs $1,800 to $4,600 depending on square footage, current R-value, and whether old material needs to come out first. Most jobs are completed in a single day, and you’ll have a written price in hand before any equipment comes off the truck. This page is for Long Beach homeowners who own homes insulated with Owens Corning fiberglass and need it installed, topped off, or removed by a crew that names its price up front and stands behind the work for 365 days.
Call (562) 317-6204 to speak with a live person about your Owens Corning blown in insulation job.
How Owens Corning Products Fail – and How We Fix Them
Owens Corning makes solid fiberglass products, but Long Beach’s marine layer and older housing stock create specific failure patterns we see every week. Here’s what actually goes wrong:
- AttiCat Pink blown-in fiberglass settling below labeled R-value. The AttiCat system works well when installed at the proper depth and density, but in Long Beach attics with old recessed can lights and unsealed top plates, air movement compresses the material over time. We see attics in Belmont Shore and Naples that were blown to R-38 in the 1990s now testing at R-19 or lower. The fix is air sealing first, then re-blowing AttiCat to the correct depth with the Owens Corning calibration chart, not a guess.
- ProPink blown-in insulation that’s gone matted and dead from roof leaks. Long Beach homes built before 1980 often have original composition shingle roofs that leak around flashings during winter storms. Fiberglass doesn’t absorb water the way cellulose does, but it does mat down and lose its loft, which destroys thermal performance. We remove the affected material, the roofer fixes the leak, and we re-blow clean AttiCat at the right depth.
- Owens Corning blown-in installed over old vermiculite or asbestos-containing material. This is common in Long Beach bungalows from the 1940s and 1950s. A previous owner or flipper blew new fiberglass directly over vermiculite that may contain asbestos. We don’t disturb that material without testing. Our crews are trained to identify it, stop work, and bring in proper testing before touching anything. Fiberglass over vermiculite is a code and safety issue, not just a performance one.
- Loose-fill depth inconsistencies from DIY AttiCat rentals. Homeowners rent the AttiCat machine from a big-box store, blow the material too thin in the corners, and end up with cold spots. We routinely correct DIY jobs by mapping the attic with depth markers and re-blowing to a consistent R-38 or R-44 across the entire floor, including the soffit edges where amateurs always go light.
- EcoTouch PINK FIBERGLAS batts used in rim joists or kneewalls that don’t fit Long Beach’s framing. In older Long Beach homes, non-standard stud spacing means batts get compressed or left with gaps. When we transition a batt area to blown-in AttiCat, the material fills odd cavities and settles into place without the gaps that kill R-value. It’s not that the batt product failed; it’s that the framing never matched the batt dimensions.
Our Owens Corning Blown In Insulation Process
Every Owens Corning job at Alden Insulation Long Beach follows the same sequence, whether it’s a 900-square-foot Belmont Shore bungalow or a 2,600-square-foot home in Bixby Knolls:
- 1
Call and assessment. You call (562) 317-6204. A live person answers. We schedule a visit inside a specific window, and a background-checked technician in uniform shows up at that time.
- 2
Attic inspection and measurement. We measure square footage, check current insulation depth and R-value, inspect for air leaks at top plates, can lights, and chases, and look for moisture or pest activity. We write down what we find.
- 3
Written quote. You get the price in writing before any work starts. The number you approve is the number on the invoice. No add-ons at the door, no “discovered something” adjustments.
- 4
Prep and air sealing. We seal the bypasses that undermine blown-in insulation in Long Beach’s coastal climate: top plates, wire penetrations, bath fan housings, and recessed can light frames. Air sealing comes first because blowing fiberglass over leaks is like putting a sweater over a hole in the wall.
- 5
Blowing Owens Corning AttiCat to spec. We use the manufacturer’s depth charts and blow to your target R-value, typically R-38 or R-44 for Long Beach attics. We install depth markers so you can verify the material is there after we leave.
- 6
Cleanup, verification, and the 365-Day Done Right Promise. We leave the attic and the hallway as clean as we found them. You get a written guarantee covering the work for a full year. If it fails within 365 days, we return at no charge.
What Owens Corning Blown In Insulation Costs in Long Beach
Most Owens Corning blown in insulation projects in Long Beach run between $1,800 and $4,600. A straightforward top-off on a 1,200-square-foot attic with accessible access runs closer to $1,800 to $2,400. A full removal of old, matted, or contaminated material plus new Owens Corning AttiCat blown in to R-38 typically lands between $3,000 and $4,600.
What moves the price: attic accessibility (scuttle hole vs. pull-down stair vs. no access), whether old insulation needs removal, the target R-value you want, and whether air sealing is needed first. Long Beach’s older bungalows with low-slope roofs and tight attics take longer and cost more. Call (562) 317-6204 for a free written estimate on your attic. No pressure, no same-day discount pitch, just a number you can hold us to.
Why Long Beach Homeowners Call Alden Insulation Long Beach for Owens Corning Work
We’re an independent Owens Corning service provider, not a manufacturer-authorized dealer, which means we have no incentive to push one brand over another. We install Owens Corning because it’s a solid fiberglass product with predictable performance, but we also work with Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, GreenFiber, and Reflectix. If Owens Corning isn’t the right fit for your attic, we’ll tell you and show you why.
The Garrison Standard governs every job: written prices, written guarantees, background-checked uniformed technicians who arrive in the window we gave you, and a 365-Day Done Right Promise baked into every agreement. That promise isn’t marketing language. It’s the terms of the work. If the insulation fails within a year, we come back and fix it at no charge. Bryce Holloway built this operation in Long Beach on a simple idea: give homeowners an honest assessment, quote a fair number, and leave the attic in better shape than you found it. Good insulation doesn’t announce itself – you just stop noticing the cold.
FAQs
No. Owens Corning’s product warranty covers the material itself, and professional installation by an independent contractor does not void that coverage. We install AttiCat and ProPink products according to the manufacturer’s depth and density charts, which keeps the product warranty intact. What we guarantee separately is the workmanship: the 365-Day Done Right Promise covers our installation for a full year in writing. Call (562) 317-6204 if you want to walk through your existing warranty before scheduling.
Yes. We match existing Owens Corning AttiCat depth and R-value by taking measurements across the attic floor, then blowing to the higher target you specify. If your existing material is a competitor’s product, we can still re-blow with Owens Corning over it in most cases, but we’ll check for moisture, compaction, and air sealing first. Mixing fiberglass brands is generally fine; mixing fiberglass over cellulose or vermiculite requires more care.
Most attic insulation jobs in Long Beach are completed in one day, including removal of old material when needed. Larger homes with multiple attic sections or significant air sealing requirements may run into a second day, and we’ll tell you that in the written quote before work begins. We schedule inside a specific window, not a vague half-day range.
Topping off is cheaper when the existing material is dry, clean, and at least partially functional – typically $1,800 to $2,400 for a standard Long Beach attic. Removal and replacement costs more, $3,000 to $4,600, but it’s the right call when the old material is matted from roof leaks, contaminated with rodent droppings, or sitting over vermiculite. We’ll show you what’s in the attic and give you a written quote for both options, then let you decide.
We install and remove blown-in Owens Corning AttiCat and ProPink, and we also handle Owens Corning batt products in Long Beach homes where batts make more sense for the framing. We also work with Reflectix for radiant barrier applications in attics. Our focus is residential attic insulation, blown-in insulation, and insulation removal, using whichever material fits the job. Call (562) 317-6204 and we’ll tell you what we’d put in your attic and why.
Written by Bryce Holloway, Owner, Alden Insulation Long Beach at Alden Insulation Long Beach, serving Long Beach and nearby areas.